SD type

*Please double check availability before ordering

The safety of having an additional 20% improvement in brake performance.

• Simulated testing of both the SD and PD discs in the same conditions show a increase of brake performance by up to 20%.

• With a 20% increase in brake performance, the driver can drive with more comfort and safety.

• After careful consideration of various factors such as pad wear, noise level, and gas ventilation, 6 slots was adopted as a standard for SD brake discs.

• The best width, angle, and depth of the slots were chosen using the data from various races and road tests.

• For the 6 slot brake discs, reverse rotation (slots pointing forward) is recommended for a better brake performance.

• By offsetting the slots on the inner and outer side of the disc, an improvement in brake modulation was achieved.

The above chart represents evaluation values of our product in 100 phases in comparison with genuine rotors of the test model. Values of genuine rotors show 50.

1. The values above should be only used as a reference to better understand the performance differences.

2. Higher values signifies the performance increases when compared to the standard disc.

Cutting for balancing

All DIXCEL brake discs are checked for balance to prevent vibration.
Correction of the balance is done by milling/cutting out the side of brake discs.
This is a method taken by car manufacturers' brake discs.

The DIXCEL SD series discs are for the users who want more braking power and better disc appearance when compared to their standard disc.

Brake discs in bad condition can not only cause decreased brake performance but also cause brake noise. We recommend changing your discs and pads at the same time.

Feel free to ask questions.